Chainsaw Fuel Related Problems Common to All Outdoor Power Equipment

Chainsaws and lawn mowers, like any other small engines in outdoor power equipment, can experience various fuel-related problems that affect starting and running performance. Here are some common issues related to chainsaw fuel systems and their potential causes:

How Fuel Affects Chainsaw Starting When Chainsaw Won't Start

Stale Fuel: If the mower has been sitting with fuel in the tank for an extended period, the fuel can become stale and less effective. Stale fuel doesn't burn well, making it difficult for the engine to start.

Clogged Fuel Filter: A clogged fuel filter can prevent fuel from reaching the carburetor, leading to starting issues.

Dirty Carburetor: Dirt or debris in the carburetor can block the fuel passages and jets, affecting the fuel-air mixture and making the engine hard to start. So can old fuel, as it gets gummy and messes up carburetors and fuel lines.

How Fuel Can Cause Engine Stalling or Running Rough

An engine can stall or run rough when it's not getting enough, or proper mixture of, combustible ingredients.

Water in Fuel: Moisture can enter the fuel tank, causing the engine to stall or run rough. This could be due to leaving the mower in a rainy environment or using a fuel container that has water in it.

Clogged Air Filter: A dirty air filter can disrupt the air-to-fuel ratio, leading to rough running or stalling.

Carburetor Issues: A faulty or misadjusted carburetor can cause poor fuel delivery, leading to rough engine operation.

Choke: If the engine is choked when it should not be, or choked too much it'll run badly and eventually stall. The fuel to air mixture cannot be too rich or too lean for smooth running engines. An engine needs less air to start, or as it warms up, so the choke needs to be closed to choke off the air supply somewhat. Then when the engine is warm, the choke must be fully open to allow ample air to mix with the fuel.

Fuel Problems Can Cause Excessive Exhaust Smoke

Over-Choked Engine: If the engine is over-choked, it can cause excessive fuel to enter the combustion chamber, leading to black smoke in the exhaust.

Oil in the Fuel: Accidentally adding oil to the fuel tank instead of the oil reservoir can cause blue or white smoke in the exhaust.

Fuel Leaks Are Common Fuel Related Problems in Chainsaws and Mowers

Damaged Fuel Lines or Fittings: Cracked or damaged fuel lines or fittings can cause fuel leaks, which are not only wasteful but also hazardous.

Can Fuel Cause Lack of Power?

Yes.

Dirty Fuel System: A dirty fuel system, including the fuel tank, fuel lines, and carburetor, can restrict fuel flow, resulting in reduced engine performance.

Improper Fuel Mixture: Using the wrong fuel-to-oil ratio (in 2-stroke engines) can affect engine power and cause damage.

How To Troubleshoot Chainsaw Fuel System Problems

To troubleshoot and fix any of the above issues, follow these steps:

Always use fresh, clean fuel. If yours has been sitting for some extended amount of time, then dump it and get fresh gas from the pumps. Also, if you suspect water in the fuel, drain the tank and refill with fresh fuel.

Check the fuel lines and fittings for any signs of damage or leaks. The problem could be that the gas is not getting to the destination, or not in sufficient quantity or speed. 

Replace the fuel filter regularly as recommended by the manufacturer. Clogs are a major cause of fuel flow problems and they're often caused by a dirty filter. 

Engines have to breathe too! Ensure the carburetor is clean and properly adjusted so it can manage the proper air to fuel mixture. Also, clean or replace the air filter as needed.

Mower and Chainsaw Repair

If you're unsure about handling the repairs yourself, it's best to take outdoor power tools to a qualified technician or a service center for inspection and maintenance.

Mower and Chainsaw Parts

• chainsaw fuel tank and parts like vent tubes and gas caps
• chainsaw primer bulb
• chainsaw fuel filter
• chainsaw fuel line
• chainsaw carburetor
• chainsaw carb rebuild kits
• chainsaw choke parts

The Future of Chainsaw Mills: a Booming Market

 Chainsaw mills have emerged as a game-changer in the world of lumber production, offering a cost-effective and efficient way to transform raw logs into high-quality lumber. As the demand for sustainable and locally sourced materials continues to grow, chainsaw mills have become an attractive option for both professionals and hobbyists alike. Let's delve into the future market of chainsaw mills, and explore the factors contributing to their popularity.

Three Reasons for Rising Demand for Chainsaw Mills

In recent years, there has been a significant increase in the demand for chainsaw mills, driven by three key factors:

1.  Sustainability and Eco-Friendliness: Chainsaw mills promote sustainable forestry practices by utilizing locally sourced timber and minimizing waste. With a growing focus on environmental conservation, the demand for eco-friendly lumber production methods is expected to rise further.
2.  Cost-Effectiveness: Chainsaw mills offer a cost-effective alternative to traditional lumber production methods. They eliminate the need for expensive sawmills and reduce transportation costs by enabling on-site milling. As a result, small-scale businesses and individuals can enter the lumber industry with minimal investment.
3.  DIY Culture and Homesteading: The resurgence of DIY culture and the increasing interest in homesteading have contributed to the popularity of chainsaw mills. Individuals are now empowered to mill their own lumber, allowing them to build custom projects and reduce reliance on commercial suppliers.

Future Market Trends for Chainsaw Mills

The eco-friendliness of chainsaw mills sets them up for future sustainability. Their cost effectiveness for the DIYer, homesteader, and general home user makes them a great hobby or lifestyle necessity. Those points lend themselves well to the future market growth for them. To those points, add the following facts, and you have a sales environment for the future needs of chainsaw mills.

a) Advancements in Technology: Chainsaw mills are continuously evolving, with manufacturers incorporating advanced features to enhance productivity and safety. These advancements, such as automated log positioning and digital measuring systems, are expected to drive market growth by improving efficiency and reducing manual labor.

b) Expansion of User Base: As chainsaw mills become more user-friendly and accessible, their market will expand beyond professional lumber producers. Hobbyists, artisans, and even individuals seeking a sustainable way to utilize fallen trees on their property will contribute to the growing customer base.

c) Online Sales and E-commerce: The rise of HLSupply's e-commerce platform has revolutionized the way parts are bought and sold. Chainsaw mill manufacturers and suppliers can tap into this trend by optimizing their online presence and leveraging partnership strategies to reach a broader audience and increase sales.

The future of chainsaw mills looks promising, with a growing market driven by sustainability, cost-effectiveness, and a DIY mindset.

HLSupply stocks portable chainsaw mills at great prices all year long. If you have a chainsaw with a bar length of 36 inches or less, this portable chainsaw mill is well rated. It is heavy duty and well build, so you will get good value from its low price. 

HLSupply Reviews - Top Rated Outdoor Power Equipment Parts Seller

 When a High Level Supply store like us comes to the market, we come to play nice and fair with everyone and HLSupply reviews around the 'Net prove that we're doing some things right. Our aim has always been to treat folks right, sell good chainsaw parts and replacement parts for other outdoor power equipment that work well at great prices, and ship them quickly. 

Maintaining High Ratings and HLSupply Reviews While Scaling

We always had 5 main goals that have really helped us maintain high ratings and stellar HLSupply reviews: 

1. Be honest
2. Sell high quality parts
3. Keep prices fair
4. Treat customers well
5. Ship immediately

HLSupply Maintains High Standards Despite Higher Volume and More Employees 

The more a company sells, the more customers are dealt with, and more chances of problems arise. 

In our HUGE WAREHOUSE in Daytona Beach, Florida, there are hundreds of thousands of parts ready for you. We employ courteous and conscientious pickers, packers and shippers to fulfill orders accurately on the day that the orders are received*. In the offices, we have shipment receivers, phone sales reps, customer relations specialists, buyers, and management.

Since inception in 2010, our sales volume has risen exponentially, and to facilitate that growth while satisfying the demand of the customer base, we've surmounted a lot of hurdles. We've been tested in software, staffing, warehousing, fulfillment technology, parts R& D, parts supply chain sourcing and all kinds of things that challenge a company on a day to day basis. There are some cases when we are not able to satisfy some customers, that's inevitable for every vendor out there. Through all our sales growth and company expansion, we've met those challenges and still maintained great HLSupply reviews. Thank you, EVERYONE!

HLSupply Reviews In Marketplaces

To add to all our in-store and online growth, we've expanded to several marketplaces where reputations are at stake and standards are extremely high, and being a top rated seller is difficult to achieve. We're all over the Web, and you can see our testimonials in many places.

HLSupply Google Ratings & Reviews

We display a running total of our Google Reviews in the bottom corner of our own website at https://www.hlsproparts.com that is curated by Google from their Merchant marketplace, Maps, and Ads.

HLSupply eBay Ratings & Reviews

We're happy to be a TOP SELLER on eBay receiving 42,892 reviews, 99% of which are positive feedback.

HLSupply Amazon Ratings & Reviews

We sell a bit more here than other marketplaces, and Amazon is a pain to deal with. Nonetheless, we've maintained a 4.5 / 5 star rating there over the years. We get 5 star ratings here 88% of the time. 

HLSupply Walmart Ratings & Reviews

Walmart has been a market of significant growth and growing pains, yet customers give us 89% positive reviews and 4.5 / 5 star ratings overall.

Overall Sentiment About HLSupply in Chainsaw Forums

Chainsaw repair gurus speak highly of HLSupply on forums like https://OPEforum.com where helpful mechanics and chainsaw operators gather. Their opinions matter deeply. 

HLSupply Reviews

All in all, it has been fun and invigorating, and we welcome all HLSupply reviews and take everything into consideration. In the future we will keep up the good work so that customers can have what they want at a price that is fair, as quickly as possible. Keep submitting your reviews folks! You are greatly appreciated. 

*Daily order cut off time is 2pm Monday to Friday, because that's when the delivery companies make their pickups.

Chainsaw Bag Alert

Recently, while poking around searching for chainsaw parts vendors, we discovered this chainsaw bag for carrying saws with their bar and chain still attached. We've always sold plastic hard-case chainsaw carrying cases in store and online, and it seemed a logical way to carry a saw mostly because of the sharpness of the teeth on the chain. However, we think these softer chainsaw bags are quite handy and valuable. 

Toting a chainsaw around in a hard case is a bit cumbersome, and when empty, you need to store that plastic carrying case somewhere that it won't "walk away", if you know what I mean. A chainsaw duffle bag, on the other hand, is easier to conceal. Not only is storage of the empty tote bag much easier than a hard case, but it's lighter to lug around the field. It's just easier to carry a saw in one of these.

We find these handy chainsaw bags, as pictured below, to be very convenient, waterproof, unbranded, easy to store, and not expensive. Dark enough to not get covered in dirt on the first day. Available in all black and in red. 

Unbranded Chainsaw Bag

Unbranded is good, because it won't matter if your saw is a Husqvarna, Stihl, Echo, Shindaiwa, McCulloch, Craftsman, Ryobi, Dewalt or whatever. It really doesn't matter. This is just a plain good way to carry a chainsaw. Heck, you're probably already wearing a hat with that name brand on it right now, so you're already representing. Haha!

Another reason why using a no name tote to carry your saw is good idea, is that it's less noticeable, so less likely to get pilfered. Consider one of these chainsaw bags to be part of your security strategy.

Waterproof Chainsaw Bag - Solid Chainsaw Storage For Home Chainsaw users or Lumberjacks

If only there was a chainsaw bag that would be made of tough enough material to carry a saw with the bar and chain on, instead of the dumb plastic boxes. Oh wait! There is one! You're lookin' at it (above).

Made of heavy duty oxford cloth, a tote bag like this should withstand the test of the work for which it's intended. Suitable for homeowner saws and for pro arborists and tree services to use while felling trees on job sites.

Lug your saw around without the angry plastic case bangin' into the side of your leg all the time, toss it into the open bed of your truck in exposed weather, unzip it and pull that pride and joy out for work. EASY! 

• 100% brand new and high quality.
• Made of heavy duty oxford cloth, durable, wear-resistant and waterproof.
• Portable design, you can carry it anywhere by hand.
• Long zipper design makes it is easy to store and take out your chainsaw.
• Great storage bag to protect chainsaws from dirt and dust and avoid being accidentally scratched.

I think you'll love this tote bag for chainsaws. We do.

TL;DR Why do we love the duffle bag for saws idea? They're waterproof, light, easy to carry, stealthy, cooler than a box, inexpensive.

Shut Up & Take My Money

Full Disclosure: We'll get a little wee commision if you buy one, but that's not why we're sending you over there to buy one... they're just cool.

Recession Spending on Chainsaw Parts

Daytona Beach, FL There may be some indication that there is a growing trend of recession spending on chainsaw parts and other outdoor power equipment parts. At HLSupply, revenue in the second quarter of 2022 may indicate that the pending recession (or is it already current?) might indicate that hard working folks are spending on parts to repair their yard and tree machines instead of buying new equipment when there are breakages or deficiencies. In April and May, outdoor power equipment parts sales at HLSupply were closer, though still far below the same months of 2021. However, in these first 6 days of June, sales of chainsaw parts et cetera are almost equal to the first six days of June 2021. Are people being more cost conscious with their outdoor power equipment expenses due to the recession? Is the everyday person watching expenses of all other things similarly due to the recession? It seems that everything points to the decision to buy chainsaw parts and fix your equipment is wiser than buying new. Why? Inflation is too high now, and on top of that there are still factors effecting prices and delivery times due to COVID, while equipment manufacturers are raising their new equipment prices frequently and yet HLSupply prices of chainsaw parts and other parts are mostly the same. Inflation is way up with great effect on the cost of living, gas prices are up a lot, and we are still in a housing bubble. Will that bubble POP soon too? Sadly, the guesstimates are "YES". Some argue that the recession isn't here yet. Others have concluded that certain economic facts indicate that a recession is looming. Still others claim the recession is already upon us. This may get worse than it already is now in mid-2022. Leave a comment below about your spending habits during a recession. Do you cut back on anything? If there are tools of your trade or hobby or lifestyle that require a little more attention than just plain old maintenance, such as repairs or replacement, what will YOU do? Can you even afford to put gas in your chainsaw right now? LOL I mean $4.75/gallon of regular 87 octane fuel is outrageous. Right?

WOW! This Arborists Forum Is Really A Fantastic Arborist Site

Tree Surgeons and Arboriculturalists alike will appreciate this new Arborists forum. It's where tree surgeons, arboriculturalists, lumberjacks, firewood gatherers, loggers, can contribute tutorials and photos or videos of their chainsaw work along with tips and tricks for tree climbers, plus lots of other fun. New tree climbers can feel comfortable to ask questions here too, and nobody reigns supreme as "the one to fear".

We at HLSupply have a lot of customers who are in the tree business. We are a world-leading aftermarket and OEM parts provider for all makes of chainsaws for your fix-up projects and we know a lot of commercial arboriculturalists. By and large, the arborists that we know, like to speak with others in their field and help newcomers to their profession. Many have questions, many have answers, so it’s great that they have a FREE online place to gather and communicate.

Read on to discover the link to where this arborist site is. It’s NOT where you think.

If the arborist forum you’re on is too full of distracting ads, and under new ownership or newly managed with too many fees, this new arborist site will be a fantastic place to move and resume your chainsaw lifestyle.

Why Participate On This Arborist Forum?

If you are a chainsaw enthusiast, or professional lumberjack, or do it for sport; if you want to fix or modify a chainsaw, or run a repair business; if you work in the tree industry, then we recommend this arborist site where you can interact with suggestions, questions, answers and examples of tree work. Photos and videos are welcome, it’s a clean and friendly environment, and has very helpful people who want you to succeed.

You won't find a lot of crap about cars, cats, and porn; it’s about chainsaws and trees, managing forests and land, and milling your lumber or cultivating firewood. It’s an arborists forum that is HLSupply approved!

Arborists Discussions

Tree work is a grueling business, so perhaps a new place to blow off some steam is in order after a hot day in the trees. Want to discuss arborist business ideas and marketing techniques? Want to learn how to become an arborist? wondering about arborist certification in your area? Got a beef about your arborist salary? Come over and get involved in the conversation.

This is a good arborist site.

We Love Our Arboriculture Professionals

HLSupply helps tree climbers and arborists everyday with product questions and mechanical help, and replacement parts. We love chainsaw related discussions that we have on the phone with each of the pros we serve, and we love goofing around a lot too.

Take our word for it, for a new place to go, that is just like talking to us on the phone, pros in the tree industry can carry on conversations and share videos and photos online at this arborist site.

Husqvarna X-Cut® Narrow Kerf Saw Chain

Introducing the Husqvarna X-Cut® saw chain. After years of research, development and live tests, the Husqvarna X-Cut® chain is finally here. The slit (kerf) made by cutting with a chainsaw that is equipped with this chain is very narrow, and will require less engine power (and physical muscle power) to run it than a standard cutting system. We encourage you to try it. Throughout the X-Cut design and the manufacturing process, every facet of the X-Cut® chain has been extremely refined. With this chain you get outstanding sharpness straight out of the box, and that sharpness lasts longer before filing is needed.

What A Husqvarna X-Cut® Narrow Kerf Saw Chain Will Do For YOU

This chainsaw chain will enable you to work longer without re-tensioning, because the X-Cut® chain is pre-stretched at the factory. Imagine not being slowed down by tedious, constant adjustments. Consequently, the risk of damaging your saw due to a slack chain is decreased significantly. Wear on the cutting system of your chainsaw will be reduced, and so will the need for service. Less chain stretching equates to less tedium for you and less risk to your chainsaw.

Here's Partly How Husqvarna Achieved Such High Durability

Wear on the cutting system of your chainsaw will be reduced, and so will the need for service because a precisely balanced combination of materials and manufacturing processes have resulted in the X-Cut® chain’s excellent, dynamic durability. 1) It has been made with optimal heat treatment. Husqvarna has developed a unique method for the X-Cut® chain’s hardening. This process involves optimal heat treatment and cooling – creating an incredibly durable structure on the molecular level. 2) The micro-structure of the steel is not too hard, not too soft. The chrome layer applied to it is not too thick, not too thin. The steel and the chrome have been precisely defined on a molecular level to ensure this chain’s high sharpness and cutting capacity. 3) Speaking of cutting efficiency, the X-Cut® chain is designed to cut faster and smoother right out of the box. It's easy to understand that with your cutting efficiency improved, less of your own physical effort is required to make each cut and that certainly makes the job easier on your body in a day's work. You'll see it in your results. 4) Small, arrow-shaped channels in the links transport oil to the X-Cut® chain during operation, guaranteeing superior lubrication. The result is less wear and tear on your Husqvarna chainsaw. 5) A saw chain’s cutting angle is critical. The tighter the angle, the higher the sharpness – however, if you overdo it, the cutter will lose sharpness and break. With the X-Cut® chain, Husqvarna has found the perfect angle.

9 Reasons Why YOU Should Run A Husqvarna X-Cut® Narrow Kerf Saw Chain

1. Sharpness That Lasts
2. Low Stretch
3. High Durability
4. Optimal Heat Treatment
5. Efficient Cutting
6. Optimal Cutting Angle
7. Precision Chrome and Steel
8. Superior Lubrication
9. Less Physically Demanding

Buying Pixel Chains

The difference between a pixel chain and regular chain the width of the cut they make (kerf). You can not run regular chain on a Husqvarna pixel bar if it involves mixing guages, but you can use .050 guage pixel chain if the bar is .050 guage. Where some folks get messed up is when different language and abbreviations are thrown in, such as PICCO which can be the same as calling it pixel. This is not the same as Low Profile, although there are Narrow Kerf versions of LP. Any of these will work on a give bar of the same gauge and pitch provided you don't try to use narrow kerf on a standard kerf bar. Pixel bars and chains are narrow cutters and are good for lower powered saws because they make less work load. You can run normal .325 .050 chains on a pixel bar. But you can not run a pixel chain on a normal bar because the bar would be too wide and would stop you from cutting when it hit the wood. If you did install a pixel narrow kerf chain on a normal kerf bar and tried to cut wood, it wouldn't cut past the chain depth. The slit or kerf that the pixel chain would be cutting would be smaller than the width of the bar, so the bar would get stuck. Remember the traditional jargon and measurements of chains when purchasing: pitch, gauge, and number of drive links. Then add the fact that they're low profile, narrow kerf, then their shape (chisel, semi-chisel), cutter spacing (full complement, semi-skip, full skip), include any low-kickback features, special grinding angles, carbide tips. Anytime you change a chain, you just have to verify that the sprocket and bar are compatible, and that there aren't any clearance issues with the saw itself. Get all the info at https://www.HLSproParts.com today.